DOES NOT YELLOW OR FLAKE OVER TIME.
HOW TO USE IT
Ready to use, no dilution necessary. Apply an even, continuous coat of WET on a clean, dry surface with a large, flat paintbrush, lambswool applicator or roller.
Wait 24 hours and apply a second coat, using the same method.
For particularly porous materials a third coat may be needed to achieve the desired wet-look effect.The surface may be used for normal foot traffic after 24 hours.Full cure and maximum sealer protection is achieved in 24 hours.
Do not apply on terracotta floors or polished surfaces. Do not apply the product outdoors if rain is in the forecast. Use PROSTRIP if the product has been applied incorrectly.
Unpolished natural stone ›
215 sq.ft. (20 m2) Coverage rates are indicative and per coat.