WET ECO Wet look sealer

ADVANTAGES

ECO-FRIENDLY: WATER-BASED.
WEATHER RESISTANT.
IS NOT AFFECTED BY RESIDUAL HUMIDITY: CAN BE APPLIED 24-48 HOURS AFTER INITIAL CLEANING.
VERY LOW VOC EMISSIONS: CONTRIBUTES TOWARDS LEED CREDITS.

HOW TO USE IT

Ready to use, no dilution necessary. Shake before use.

Apply an even coat of WET ECO to clean, dry floors using a large, flat paintbrush, lambswool applicator or roller, rubbing into the grout joints.
Apply a second coat of the product 2-3 hours after the first coat following the same method.The surface may be used for normal foot traffic after 12 hours.Full cure and maximum sealer protection is achieved in 24 hours.

PLEASE NOTE

For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1:1 product to water). Do not use on polished surfaces. Do not use on treated surfaces.

COVERAGE

1 QT (0.95 L)
Unpolished natural stone, terracotta › 100-205 sq.ft. (9-19 m2)
Coverage rates are indicative and per coat.