MP90 Natural look penetrating sealer

ADVANTAGES

DOES NOT FORM A FILM OR DISCOLOR OVER TIME.
TREATED SURFACES ARE SAFE FOR FOOD CONTACT.
DOES NOT ALTER THE NATURAL LOOK OF THE SURFACE.
PFOA FREE: NON CARCINOGENIC.

HOW TO USE IT

Ready to use, no dilution necessary. On a dry and clean surface, apply an even, generous coat of MP90 with a paintbrush or lambswool applicator.

Let sit for 10 minutes, then wipe and rub the surface to allow any excess product to completely penetrate or be removed.
The surface may be used for normal foot traffic after 8 hours.Full cure and maximum sealer protection is achieved in 24 hours.

PLEASE NOTE

Before full application, test the product on a small, inconspicuous area of the surface (especially on highly absorbent materials) or loose sample to check for any discoloration. Apply and leave the product to dry in a well ventilated area. MP90 does not protect marble, travertine and limestone from acid stains.

COVERAGE

1 GAL (3.78 L)
Polished stone › 1200 sq.ft. (112 m2)
Polished porcelain tile › 1200-1600 sq.ft. (112-152 m2)
Natural finish stone › 400-800 sq.ft. (36-76 m2)
Coverage rates are indicative and per coat.