MAKES EVERYDAY CLEANING EASY.
ECO-FRIENDLY: SOLVENT FREE.
IS NOT AFFECTED BY RESIDUAL HUMIDITY: CAN BE APPLIED 24-48 HOURS AFTER INITIAL CLEANING.
DOES NOT FORM A FILM, DISCOLOR OR YELLOW OVER TIME.
FAST SETUP: THE SURFACE CAN BE WALKED ON AFTER JUST 4 HOURS.
TREATED SURFACES ARE SAFE FOR FOOD CONTACT.
VERY LOW VOC EMISSIONS: CONTRIBUTES TOWARDS LEED CREDITS.
PFOA FREE: NON CARCINOGENIC.
HOW TO USE IT
Matte and polished finish natural stone, decorated concrete tile and manufactured stone, polished porcelain, quartz: On a clean, dry surface, apply MP90 ECO PLUS with a paintbrush or lambswool applicator, making sure to fully saturate the surface.
Let sit for 10 to 15 minutes, then wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, lambswool pad or sponge.
The surface may be used for normal foot traffic after 4 hours.Full cure and maximum sealer protection is achieved in 8 hours.
Before full application, test the product on a small, inconspicuous area of the surface or loose sample to check for any discoloration. Apply and leave the product to dry in a well ventilated area. Do not apply the product outdoors if rain is in the forecast. MP90 ECO PLUS does not protect marble, travertine and limestone from acid stains.
1 GAL (3.78 L)
Polished porcelain tile › 1,206-1,637 sq.ft. (112-152 m2)
Polished natural stone › 819-1,206 sq.ft. (76-112 m2)
Natural finish stone › 388-819 sq.ft. (36-76 m2)
Coverage rates are indicative and per coat.