HYBRID AND EPOXY PRO Instant cleaner for fresh hybrid & epoxy grout

ADVANTAGES

RAPIDDRY TECHNOLOGY: DRIES QUICKLY, TO BE USED DURING INSTALLATION.
DOES NOT DAMAGE GROUT JOINTS.
DOES NOT DAMAGE OR CORRODE ALUMINUM AND STEEL TRIMS.
SAFE FOR THE INSTALLER AND THE ENVIRONMENT: DOES NOT EMIT HARMFUL FUMES.
DOES NOT FOAM, NO RISING NECESSARY.
USE INDOORS AND OUTDOORS, IDEAL FOR FLOORS AND VERTICAL SURFACES.

HOW TO USE IT

Ready to use. Thoroughly remove excess grout from the tile before it begins to set, according to the grout manufacturer’s instructions.

Spray HYBRID & EPOXY PRO evenly on the surface.
Let sit for up to 3 minutes.Wipe with a grout sponge without applying too much pressure, then rinse thoroughly.If cleaning takes place a few hours after grouting, let the product sit on the surface for about 20 minutes.Refer to the grout manufacturer’s instructions for indications about when the surface is safe to use.If cleaning does not occur within 24 hours of grouting, the cured epoxy residue may be removed with EPOXYOFF Epoxy Grout Haze Remover.

PLEASE NOTE

Do not use on absorbent materials such as absorbent stone, wood and methacrylate. Test the product before use to determine the material’s resistance and the dwell time required for the product to reach maximum effectiveness. Safety data sheet available upon request.

COVERAGE

24 OZ (710 ml)
Porcelain and ceramic tile up to 161 sq.ft. (15 m²)
Large format tile grout joints up to 1,148 linear feet (350 linear meters)
Mosaic up to 161 sq.ft. (15 m²)
Coverage rates are indicative.