STONEPLUS ECO Matte finish penetrating stone enhancer

ADVANTAGES

DUAL ACTION: SEALS AND ENHANCES SURFACES.
ECO-FRIENDLY: WATER-BASED.
IDEAL FOR INDOOR AND OUTDOOR SURFACES.
DOES NOT FORM A FILM OR YELLOW OVER TIME.
UV AND WEATHER RESISTANT.
LONG LASTING PROTECTION.
TREATED SURFACES ARE SAFE FOR FOOD CONTACT.
PROVIDES VERY HIGH COVERAGE RATES.
VERY LOW VOC EMISSIONS: CONTRIBUTES TOWARDS LEED CREDITS.

HOW TO USE IT

Ready to use, no dilution necessary. Shake well before use.

Apply STONEPLUS ECO to a clean, dry surface using a paintbrush or other suitable applicator.
Rub the surface to allow the product to completely penetrate until any excess residue is wiped off.The surface may be used for normal foot traffic after 4 hours.Full cure and maximum sealer protection is achieved in 8 hours.For deeper, more intense color, apply 2-3 coats; wait no more than 10 minutes between coats.Remove any residue by rubbing the surface with a cloth soaked in STONEPLUS ECO.When applying the product on particularly absorbent materials, apply a larger quantity of product on the surface.On compact materials, such as polished natural stone, apply the product to sections of a few square feet at a time to facilitate removing residue.

PLEASE NOTE

Once the surface has been treated with STONEPLUS ECO, the treatment cannot not be reversed; the stone cannot return to its original state. Before full application, test the product on a small, inconspicuous area or loose sample to see the final color of the stone after treatment. The product does not protect marble, limestone or travertine from acid stains. Apply and leave the product to dry in a well ventilated area. When applying the product indoors, ventilate the room in order to speed up the drying process. Keep the product in a cool, dry place.

COVERAGE

1 QT (0.95 L)
Polished stone › 410 sq.ft. (38 m2)
Natural stone › 205-259 sq.ft. (19-24 m2)
Coverage rates are indicative and per coat.