INSTANT REMOVER Instant cleaner for fresh cement grout

ADVANTAGES

RAPIDDRY TECHNOLOGY: DRIES QUICKLY, TO BE USED DURING INSTALLATION.
NO FOAM, NO RISING NECESSARY.
DOES NOT DAMAGE GROUT JOINTS.
DOES NOT DAMAGE OR CORRODE ALUMINUM AND STEEL TRIMS.
USE INDOORS AND OUTDOORS, IDEAL FOR FLOORS AND VERTICAL SURFACES.
HIGH COVERAGE.
SAFE FOR THE INSTALLER AND THE ENVIRONMENT: DOES NOT EMIT HARMFUL FUMES.

HOW TO USE IT

Ready to use. Wait for the grout to initially set and become firm to the touch (usually about 10 to 30 minutes, according to the grout manufacturer’s instructions).

Carry out an initial cleaning of the surface with a damp sponge.
Then, spray INSTANT REMOVER and let sit for 1-2 minutes.For textured tile, let sit for 5-10 minutes.Clean using a sponge trowel, rinsing it often to keep it clean.For stubborn stains, repeat the above instructions after one hour.Refer to the grout manufacturer’s instructions for indications about when the surface is safe to use.To clean the back of large format tile:Spray INSTANT REMOVER on a soft sponge and wipe the back of the tile.

PLEASE NOTE

Do not use on acid sensitive materials. Do not use abrasive sponges. Test the product before use to determine the material’s resistance and the dwell time required for the product to reach maximum effectiveness.

COVERAGE

24 OZ (710 ml)
Porcelain and ceramic tile up to 161 sq.ft. (15 m²)
Large format tile grout joints up to 1,148 linear feet (350 linear meters)
Mosaic up to 161 sq.ft. (15 m²)
Coverage rates are indicative.